Azmuth drive.
|
|
|
|
|
30
Here are the parts of the azmuth drive.
|
|
|
|
|
31
Note the bearing already in the azmuth shaft drive. Grease it well!
|
|
|
|
|
32
Another view.
|
|
|
|
|
33
Another view.
|
|
|
|
|
34
Install the bottom thrust bearing, grease it well.
|
|
|
|
|
35
Add the top thrust washer to the bottom bearing.
|
|
|
|
|
36
Add the azmuth gear next.
|
|
|
|
|
37
Add the top thrust washer, grease it well.
|
|
|
|
|
38
Add the rest of the thrust bearing.
|
|
|
|
|
39
Assemble the thrust springs to the plate.
|
|
|
|
|
40
Mount the plate. I missed a few steps here, and the drive motor and
azmuth hub are already installed.
|
|
|
|
|
41
Another view.
|
|
|
|
|
42
Another view.
|
|
|
|
|
43
Gather the pots and the limit switches.
|
|
|
|
|
44
Mount the CCW limit bracket.
|
|
|
|
|
45
MOunt the CCW limit switch.
|
|
|
|
|
46
Mount the CW limit bracket and switch.
|
|
|
|
|
47
Wire the motors to the limit switches.
|
|
|
|
|
48
Mount the pot gear.
|
|
|
|
|
49
Mount the limit plate.
|
|
|
|
|
50
Mount the position pot.
|
|
|
|
|
51
Another view.
|
|
|
|
|
52
Drive assemblies ready to join.
|
